Right, I was considering this one. But Jaxman claims it has no temperature sensor. So either it does something I don’t know to regulate the current, or high mode is time driven. Still holding until this is revealed.
H03 /HC30 are cheapest(25-30$/33-35$)headlamp with buck drivers. If you want more cheap you can buy headlamp without stabilization( sofirn, conwoy…) and change driver to linear one.
For buck driver lvp is not required.
Noctigon Xp16 for example is suitable for Hc30 after 5 min work.
H03 is most mod friendly host with good enough stock driver.
Build quality is much higher than new 20-25$ l-shaped flashlights. And last but not least H03 is lightweight it is important for headlamp.
Here are some shots of the light output PWM at different levels.
Moonlight
Low
High
Turbo
Looks like Low – High uses a 15.2KHz PWM and increases the duty cycle as it gets brighter.
Moonlight and Turbo I see no PWM.
I (assume) Turbo is a constant current affair as opposed to running flat out.
I’ve not tried to get inside so I have no idea how easy it is to mod.
Hope this helps.
All the Best,
Jeff