Wow, you are right about those being pricey!
The design is interesting, looks like deeper and narrower āreflectorsā.
I got the last lights in stock from Ric, because i wanted the desert yellow ones. I didnĀ“t find another source. But the VG10 is an alternative or this light: https://www.fasttech.com/products/0/10008950/1793800-nicjoy-g5-1-cree-xm-l2-3c-800lm-5-mode-pure-White
Had my order show up today, they look great. Now to wait for the X6ās to show up so I can build them!
Thank you!
Did need to let you know I got my package safe and sound. Excellent as always. Now to order the lights I bought parts forā¦
Im interested for D01 pill and C8 spacer for Cute 3 optics 
Finally got the pill and 10507 optics from kiriba-ru put into the green Convoy S2+ host Iāve been waiting for.
All went together great
How much would a kit for the m1 quad cost?
how much would a kit for an x6 triple cost?
I am looking to build one of these lights. I like my m1 and would like it to be more intense.
To build M1 quad, youāll need:
-my kit ($15-16 with milled place for optics legs) will be ready in 2-3 weeks
-Tpad quad pcb (http://www.mtnelectronics.com/index.php?route=product/product&product_id=700&search=quad)
ā4xLEDs (XP-L HI?)
-Khatod quad 25.4mm (PL115106 Khatod 10 Degree 25 mm Circular Beam Optic - Integrated Legs).
Kit is ready for use, just drill hole in the center of stock pcb shelf, solder driver wires and go.
I DO NOT have tpads, hi leds, khatod optics.
For X6 triple, youāll need:
-aluminium ($4) or copper ($8) spacer
-Noctigon XP32 mcpcb ($5)
ā3xLEDs (any XP-sized)
-LEDIL Cute-3 optics ($3-3.5)
Youāll need to sand mcpcb OD, drill central hole both in mcpcb and host, solder driver wires.
Obviously I have few XP32s and some leds, I will probably have Cute-3SS 2-3 month later.
I am interested in a copper pill for a triple convoy s2+, and a carclo 10507 optic.
PM for shipping details and payment?
built my X5 all, the spacer fits perfectly, thanks Kiriba-ru.
I am interested to D01 and C8 pill
I will be in the seventh heaven if somebody will grab them for the shipping cost:
They are MUCH better without fan that any other existing heatsinks.
One for $8
Five for $22
Worldwide shipping with tracking.
lol, I have thought about buying one of those a few times but just donāt have a need for it since I am overrun with PC heat sinks myself.
I did get an X6 built with your spacer, it turned out great, I used 219C 90+ CRI and the beam is amazing, the optics seem to mix the tint and give it a much more even and white beam. canāt wait to try it out!
Although I do have to say that a 26650 based light makes more sense for these triple builds, the X6 is a bit unbalanced with only an 18650 in the back, plus I like the grip of a 26650. I will be getting that F13 spacer from you for sure.
Oh and 3x 219C with thin 24 gauge wire will pull about 16-17A and make a bit over 3000 lumens if anyone is interested. It also gets HOT FAST.
Sadly I am missing 2 XP-L2ās I had planned to use in the other light so I have to wait for those or I might go with a XP-L HI. Not sure yet.
Any suggests about 26650 hosts?
I havenāt tested F13 yet, I hope big contact area can improve heat transfer. Anyway Iām not satisfied with its quality and anodizing. It feels much cheaper than X6/X7.
Last one also doesnāt looks like best choise. 20mm driver, tube that canāt take most 26650 cells, strange tail construction.
Most other 26650 lights have too big head for cute-3 optics, or electronic switch, what makes mod not so simple.
The F13 is not a super high end light for sure but it is the best 26650 host I have found so far for a triple build.
That PALIGHT X960 looks good but where can you buy it and how much does it cost? I could not find anyone with it in stock in a quick search.
Sorry for my poor english.
Palight A8 X960
2017 the latest versionļ¼has Coated glassļ¼Head is relatively largeā¦.
Quility better than F13 more.
https://detail.tmall.com/item.htm?spm=a220o.1000855.w5003-14862954686.17.VFpT7o&id=14147631179&=undefined&=undefined&=undefined&=undefined&=undefined&=undefined&=undefined&=undefined&scene=taobao_shop
How about the Jaxman X1 host (26650)? Iāve read good reviews about thenlight and there seems to a host version for about $36 shipped.
Its head looks too big for 35mm optics, similar too X3.