making a small batch of Texas Avenger "TA" Drivers fully tested running Bistro or Narsil, Clicky or E-switch, SIR800

[Lexel]

@khas

@Lexel

@khas

It’s really nice to see the driver available from an EU source as :+1: well

I would like :
Two 21mm 1s short spring, with Narsil (for two Skilhunt H02)

What version of Bistro is it ? TA’s version or TK’s version.

Skilhunt H02 needs the Narsil firmware as it is sideswitch only
current release is v1.4 for 1S lights
unless you want switch modes by unscrewing thailcap with Bistro

The Narsil driver will be equipped with an 4.7k resistor for the switch LED
the red wire goes to the LED of a resistor soldered to pin 7

I don’t think there is switch LED in the Skilhunt H02.

I am thinking of ordering a 17mm 1s with Bistro for a C8, so I would still like to know what version of Bistro it is

It is TA bistro with Triple channel.
Mode groups and hidden modes are different from stock Bistro.

Texas Avenger "TA" Driver series - Triple channel + Bistro or Narsil + Clicky or E-switch - The Ultimate open source driver!

Let me introduce you to the Texas Avenger AKA the “TA” driver series. Now in sizes ranging from 15mm up to 46mm and lots in between! Same design, firmware and parts for (almost) all of them! Great project to put together and learn about electronics. [image] [image] [image] And for size comparison, it is easy to forget the size of these things. [image] This project is open source and you are welcome to use this work yourself for personal projects. However you must release any and all chan…

This has all the information and link to firmware

Ok skilhunt H02 has no indicator LED, but you could add one