MTN Electronics: LEDs - Batteries - Lights - Chargers - Hosts - Drivers - Components - 1-Stop-US Source

[fellfromtree]

@ToyKeeper

I think Comfy removed the PFM bits, which would make the ramp less smooth but more consistent across devices and different voltages. Combining PWM and PFM allows really smooth ramping even between individual PWM levels, but it’s annoyingly sensitive to the exact hardware and even battery voltage. PWM alone gets stair-steppy at the bottom end, and PFM smoothes out those steps. (PFM changes the frequency of the pulses, PWM changes the width of the pulses, so it ran anywhere from 9 kHz to 20 kHz at the lower levels)

IIRC, he also changed the ramp shape from logarithmic to quadratic, and may have reduced the bottom to fast PWM=0 (instead of phase-correct PWM=1). I just haven’t made time to include everything yet; got interrupted and didn’t get back to it.

Wait he wrote a bell curve on the ramp? That’s what I was thinking about but the memory limits are pretty strict on the 13a… Been writing one for the last couple days Just posted it in the star thread. Anyway you could host this Toy? Might be useful code makers anyway in the future.

STAR Firmware by JonnyC - Source Code and Explanation

This firmware was written by our fellow forum member, JonnyC. Jon did a great job with this firmware, pulling together many popular elements into one great firmware. He worked hard to make the code easy to understand, as shown by the great comments placed throughout. What Features Does it Have? Clicky Version: User configurable modes Moonlight, mode order, and mode memory selectable via 105c stars Fast or Phase Correct PWM, switchable by mode level Optional turbo timer up to 120 seconds…

[RMM]

M6, L5, & L6 are in and accounted for. Hang tight for awesome deals, coming this evening via the newsletter. If you're thinking about placing an order, hang tight for a little bit, it will be worth it!

[Chazzy]

My poor wallet :_(

I don’t think I’ll be able to resist.

[RMM]

Sales Online --- SupFires too! They sure are pretty "unbranded".

[viperbart]

Great sale!

Lol @ Enova coupon code.

[RMM]

@viperbart

Great sale! Lol @ Enova coupon code.

I'm hoping it will go viral!

[Dubious_Speculation]

Wow, that is awesome!!! Was about to place a $170 order, and now the M6 is on special

Decisions, decisions.

@RMM

They sure are pretty “unbranded” :bigsmile:

What’s your opinion on the unmarked M6 in terms of it’s overall aesthetics compared to the old version?

[drdanke]

Richard, do you plan to offer a DIY parts kit for the zener mod fet driver boards? Also, can you confirm that the new Convoy M1 still has a reflector with a hole large enough for the MTG2?

That new Convoy M1 with the integrated MCPCB shelf is just begging for a MT-G2, a fet driver, and 2 of the new e-fest purple 18350’s. Oh, do you sell kevlar gloves to protect my hands?

I’ve been away from flashlight building for the summer, but just built a new S3 that I got from MTN this week. Went together beautifully.

Oh, I just signed up for the newsletter right now at 7:43 p.m. Central Time, did I miss this evenings newsletter?

[RMM]

@drdanke

Richard, do you plan to offer a DIY parts kit for the zener mod fet driver boards? Also, can you confirm that the new Convoy M1 still has a reflector with a hole large enough for the MTG2? That new Convoy M1 with the integrated MCPCB shelf is just begging for a MT-G2, a fet driver, and 2 of the new e-fest purple 18350’s. Oh, do you sell kevlar gloves to protect my hands? I’ve been away from flashlight building for the summer, but just built a new S3 that I got from MTN this week. Went together beautifully. Oh, I just signed up for the newsletter right now at 7:43 p.m. Central Time, did I miss this evenings newsletter?

Yes I do. I need to get on that and also update the FET driver listings, as they are all running fast PWM now.

I will check an MT-G2 in there tonight. I think you did miss the newsletter, but you can see the deals a few posts back.

[drdanke]

Oh, I see the sale image posted above now. Thanks!

[RMM]

All ALL-80s are gone. Someone bought a lot of them. More on the way, hopefully before the end of the sale period.

[ToyKeeper]

@drdanke

That new Convoy M1 with the integrated MCPCB shelf is just begging for a MT-G2, a fet driver, and 2 of the new e-fest purple 18350’s.

That’s exactly what I have arriving in a few days… along with the remaining parts for a Cypreus. This is going to be a bright week!

[Tapis]

Shipping Limitations - We currently cannot ship any items to Russia or Ukraine.

Do you ship to Belarus? I have some cousins I wish to send a gift to.

[fellfromtree]

I dunno about that coupon code for the 80 charger RMM… Is it just me xd

[jmpaul320]

website is down?

[Tapis]

@jmpaul320

website is down?

Use this to know for sure —> http://www.downforeveryoneorjustme.com

[velvetant]

@jmpaul320

website is down?

working for me

[jmpaul320]

its back now

[RMM]

@drdanke

[C]an you confirm that the new Convoy M1 still has a reflector with a hole large enough for the MTG2? That new Convoy M1 with the integrated MCPCB shelf is just begging for a MT-G2, a fet driver, and 2 of the new e-fest purple 18350’s.

Yes it does fit! It's the same reflector as before, I just got one out and put the LED in there.

[Rufusbduck]

The TP 4056 chargers and star drivers came today. Thanks Rich, I’ll post a pic or two here showing how they get used. On another note, would you be interested in carrying the Ledil Cute-3SS optics that fit the new 32mm noctogon board? The optic is the same diameter as the mr11 halogen bulb and can be retrofitted into older bike lights like niterider and vistalight that used them. Or maybe a one time group buy run through MtnE. They’re not expensive but shipping can triple the cost for just one.