Sofirn SC31 PRO, New Anduril Flashlight

[TimMc]

@amishbill

Now it’s time for the scary part. Blindly jamming bits of metal into its brain.
…

SP36 head disassembly / reflash -- non-destructive? (ReFlashed! Didn't Break! - much-)

I’ve had some success and a tiny bit of failure, so here I am. I managed to get the switch and driver out. In the process I lost the tip off a dental pick. All in all, a fair trade I think. The tools I used: A pair of weird, long needlenose with rounded tips, a dental pick, and a medium-stout S hook. [image] A little bit of careful convincing with the needlenose and the switch ring came right out. Holding them square and keeping outward pressure on the jaws made it fairly easy. Tip - try rot…

Notes for flashing the SP36:

SP36 head disassembly / reflash -- non-destructive? (ReFlashed! Didn't Break! - much-)

GENERAL NOTES:: This is not a ‘For Dummies’ step by step. You’ll have to follow some links and understand a few things. I hope these details help you get over some of the rough patches and uncertainties I ran into. If you can get something attached to the battery ring to pull the driver, consider it. Getting the switch out is annoying. Getting it back in properly (and straight!) is also quite annoying If you have access to a vice, consider rounding a nail and bending it like you see in some o…

Could the same be done with the SC31 Pro? :student:

I.e. Press down on the positive wire?