Good to hear that it worked out ok for you in the end.
Interested in one driver running narsil for a convoy L6
Still figuring out all the abbreviations, will come back to it when i’m confident that i have chosen my ideal configuration
I dont need an indicator led
What is the difference between narsil and narsil im?
NarsilM has a lot improvements and bugfixes and LVP for 2S implemented
For L6 I have one driver board left not reflowed yet
Typical settings are about 60dC 2.9V LVP
I’ve actually been wondering this, too. It looks like NarsilM has all the changes from Narsil 1.4 merged into it. Is there any reason to run Narsil 1.4 instead of NarsilM?
Only if you want have thermal plus timed stepdown
Received - thanks lexel!
I’m also struggling with abbreviations. I would like to order 2 or 3 drivers since a few weeks but haven’t much time to figure it out…I give up every time.
just tell us which size and for which lights you need em
if you are lazy you can order with soldered springs and cables
Bistro driver with leads just need to solder to the LED and you are done
Narsil 2 for LED and 2 for switch in simplest set up
What would be the price for a TA driver for an L6 with NarsilIM + short and long springs some wires shipping?
Do i have to give an option for power on?
13$ NarsilM
1.5$ 30mm
1.2$ LDO parts
2$ shipping
0.3$ short sprig
0.3$ long spring
0.5 or 0.75$ 2 or 3” set of wires
Optional
1$ thermal and LVP calibration
3$ tracking with 25€ insurance
Power on must be flashed one of the 4 settings
i am wanting a driver for the MT07 
I looked at a MT07 review
I can use a standard 46mm multicell driver
with separated Batt- pad as I did before with 2S/4P
Then for the center spring removing the mask to solder it there
And drill 2 mounting holes at the rim
i would be interested!
replacement order for the lost short springs arrived today
will bring the drivers to the post office today
they will be handled tomorrow
I just got my driver today in the mail! Thanks again Lexel! I’m looking forward to installing it and trying Narsil for the first time.
Since I started this topic the USDollar lost almost 7.5% compared to my currency €
So I adjust the price 50 cent per driver in OP as of today
Yeah, I noticed when I paid that the exchange rate PayPal showed me was different than what you had listed here. Since PayPal will automatically exchange the currency, you could just list the € price and let that be that. 
Its not likely that the USD or € drop drastically from one day to another
I am fine with 50 Cent adjustments if nessesary its easier for BLF members
in the Paypal request I do as well €,
as it would not make sense if people send me USD when their currency is not USD
or even worse € as paypal charges then 2 times exchange taxes €—>USD—>€
Thanks Lexel you are awesome! :+1:
I have no idea what the green cable with resistor (4.7K?) is for.
nevermind i saw this few post back.
Do you have it figured out?