Flashlights are like cats that way; you ask that question, knowing in the back if your mind that you might not want to actually know the answer.
i like it. 5000K is damn good here. stabilization also better then i v1.
but clip is too tight.
will post review when TS10 V3 is released
It seems like they are already all gone. I was looking forward to getting one in copper ![]()
What do You mean? They are not yet released ![]()
TS10v2 is long gone.
TS10v3 hasn’t been released yet, and it’s not gonna have a copper version (at least not at the release).
Thanks for the info. I have not been following very close lately. ![]()
I would like to ask whether the copper version will be available in a high-gloss (semi-mirror) finish similar to the “Lumintop FW3A”. The prototype appears to have a brushed or satin finish.
i prefer satin finish over gloss.
Unlikely I think. I had to get my TS10 Coppers onto a drill buffer with jewelers rouge to get them shiny. The machining marks do polish out beautifully. Unfortunately this may not be possible without ruining the laser etch on this version. Depends how deep the etch is, I will be giving it a go anyway, I don’t like the machining marks, and it wouldn’t take much extra process to supply the lights fully polished.
Long time no see, entering the crazy month of November, everyone has become busy
, something update:
1 、We will fix the flashing pads in the correct when production;
2、The firmware using is same as SC13cu, BUCK driver, Perhaps we can expect future updates;
3、 Coppers are available this batch with limited quantity ,The price of precious metals will make them more expensive than before, and the defect rate is a bit high ![]()
4、I am actively communicating with the factory for production, hope to release it in November
5、The Aluminum ones will come with orange and metal gay this batch
6、The clip will finally choose the HD10 ones’
![]()
![]()
![]()
This is excellent news! I’m excited for this version.
If I may, you should do some spell checking on #5.
Fantastic!
I signed up for the Wurkkos newsletter so I will get notification.
Excited for the Red Copper!
Yay copper! Any idea on the price?
Will it be a higher-quality copper like the SC13 Cu?
copper is copper ![]()
copper ![]()
Sofirn makes the TS10, so it wil be the same UnCoated Red Copper..
Actually most copper and brass alloys used in flashlights have lead and other metals added to make it softer and easier to machine. The original TS10 brass had 2.4% lead.
that is not correct about Red Copper
it IS correct about Brass (which IS a Copper Alloy)
Brass does contain Lead to make it easier to machine
(Brass in Chinese is Yellow Copper)
I avoid Brass because of the Lead content.
Your photo shows the prototype is Brass (Yellow Copper in Chinese)
I am hoping Wurkkos Copper TS10V3 will be Red Copper (not Yellow, Brass)
Copper is copper; otherwise, it would be brass or bronze.
Brass= zinc+copper
Bronze = tin+copper





