Thanks, added $ 4.56
What are the expected output levels for this combination? 7135*4 XML2 T6-3B
My Convoy S5, 2950 lux at 1 metre, with XM-L2 3B, 3*7135 and OP reflector.
Dead Goat:What are the expected output levels for this combination? 7135*4 XML2 T6-3B
My Convoy S5, 2950 lux at 1 metre, with XM-L2 3B, 3*7135 and OP reflector.
Merci Chloe,
You are a doll.
~ Dead Goat
Thanks for the offer
I sent my payment and details directly through PayPal.
Transaction ID # 1XR143xxxxxxxx91J
Bought four.
2 x black
2 x grey T6-4C 7135*8
Must resist further purchases
must r r r resist
Hi Simon.
Paypal payment (Transaction ID # 8XW265215N378490) sent for 1 unit grey Convoy S2+, standard configuration.Thanks!
Just got advise from Simon that my order has been shipped already. Now that is fast processing.
Thanks so much!
Would love to take advantage of this deal (even without ordering batteries), but…
hi Simon when paying via paypal do i send as gift or goods?
hi Simon when paying via paypal do i send as gift or goods?
goods, never use gift otherwise you forfit your PP protection for buyers.
thank you, good point
Hi Simon…just placed an order for a 7135-8 driver!
hi Simon when paying via paypal do i send as gift or goods?
gift
Ordered one gray 8*7135. Hope it gets here before 22 May!
edit - and does it now show the discount price on the regular web page for everyone now, or just those for who Simon adjusted the pricing? Wait - just checked on another browser that I never logged into AliExpress. Apparently the price has been lowered on the regular web page, no need to ask for an adjustment or paypal on the side.
[quote=keithd]
Ordered one gray 8*7135. Hope it gets here before 22 May!
2014 or 2015?
Aghhhh, can’t stop thinking about S2 with 8*7135 and stock XM-L2 led. Just sent you a “gift” - $11.97. I guess I can trust you.
If you have a tracking number pls e-mail me it.
Oh, I forget to mention that I want it gray.
- 9MH88493BS8166059
blfdemigod:Anybody know what TIR would be a perfect fit replacement for this S2+?
I have the S2+ and an S3. They have the same size reflector, and it is much shallower than the reflector in the original S2. I put this TIR in my S2+:
leddna.comThe outer holder was just slightly too wide to fit in the head. I cut just the outermost part of the holder off. The rest of the holder still works as a cup, holding the TIR at proper focus. The result is a broad, even beam. The beam is noticeably brighter with the TIR than it was with the shallow reflector. The TIR allows very little spill. I greatly prefer the TIR over using the shallow reflector in this particular light.
Another thing to note about the S2+ is that it’s pill is taller than the pill in the S3 or original S2. It appears to be the same diameter and thread size as the pill in the original S2. The pill in the S3 is slightly smaller diameter.
If the S2 & S3 are pretty close, there was a thread by Comfychair where he modded an S3 with a 10 degree TIR here
I hope you post a thread about how that mod goes.
AE order number …2120 BRgds
scooby214: blfdemigod:Anybody know what TIR would be a perfect fit replacement for this S2+?
I have the S2+ and an S3. They have the same size reflector, and it is much shallower than the reflector in the original S2. I put this TIR in my S2+:
leddna.comThe outer holder was just slightly too wide to fit in the head. I cut just the outermost part of the holder off. The rest of the holder still works as a cup, holding the TIR at proper focus. The result is a broad, even beam. The beam is noticeably brighter with the TIR than it was with the shallow reflector. The TIR allows very little spill. I greatly prefer the TIR over using the shallow reflector in this particular light.
Another thing to note about the S2+ is that it’s pill is taller than the pill in the S3 or original S2. It appears to be the same diameter and thread size as the pill in the original S2. The pill in the S3 is slightly smaller diameter.
If the S2 & S3 are pretty close, there was a thread by Comfychair where he modded an S3 with a 10 degree TIR here
I hope you post a thread about how that mod goes.
Scottyhazzard,
I need to take my S2+ apart to clean out dust behind the TIR, then reassemble it. I can take some pictures as I put it back together and post about the mod.
As far as the differences in the S2 and S3, since they have similar pill sizes and different reflector sizes, the S2 would require a spacer in order to use the TIR. Mountain Electronics sells a spacer for about $5.00 that should work. The S3 and the S2+ can use the TIR without needing a spacer. (I like the beam profiles of my two S2 lights with stock reflectors, so I don’t plan to change them to TIR.)
Guys what would you say is the best driver and led, and why?
don’t know which to go for?
Guys what would you say is the best driver and led, and why?
don’t know which to go for?
8x. You have medium and low for when you want to do something silly like use lower output.
Emitter tint is a matter of opinion. If you like cool white pick 1A (stock), if you like neutral try 3B/4C… warmer try the numbers higher up. I think most people favor the neutral to slightly warm tints (I personally love me some nice cool, pure white 1A).