The BLF GT70 "Giggle Monster" is coming! 7,500lumens, 1,500m throw! Group buy Closed!

2673 posts / 0 new
Last post
808Hi
Offline
Last seen: 6 hours 14 min ago
Joined: 01/21/2018 - 04:30
Posts: 190
Location: Hawaii

Fill form for conversion kit, 2 battery carriers.

Pulsar
Pulsar's picture
Offline
Last seen: 4 months 3 weeks ago
Joined: 07/29/2011 - 00:41
Posts: 5834
Location: Maine

Down for a conversion kit. The whole light is WAY too out of my price range compared to the original GT price, not that that is anyones fault that the original price was so good…

I would be down for at least 4x reflectors depending on price. I would even like 4x factory seconds if they would offer them cheap enough.

RobertB
RobertB's picture
Offline
Last seen: 3 hours 10 sec ago
Joined: 12/18/2015 - 17:49
Posts: 2835
Location: USA, Michigan

Lumintop should make just a complete head available so we can use our existing carriers and tubes. That would help keep the cost down a bit.

Anthon
Offline
Last seen: 9 hours 32 min ago
Joined: 09/07/2015 - 10:33
Posts: 397
Location: Spain

Interested in one conversion kit and one spare lens

Ocelot
Ocelot's picture
Offline
Last seen: 6 days 49 min ago
Joined: 02/17/2018 - 01:23
Posts: 92
Location: Hawaii

Filled form for (1) GiggleMonster , NW 4000K 80CRI , 2 spare carriers, set of 30QS , possibly spare reflector and lens...

Thanks for this, just in time for my bday !

 

 

JasonWW
JasonWW's picture
Offline
Last seen: 42 min ago
Joined: 10/22/2016 - 11:41
Posts: 9029
Location: Houston Texas

RobertB wrote:
Lumintop should make just a complete head available so we can use our existing carriers and tubes. That would help keep the cost down a bit.

I was thinking of just the lower head, the light engine. Then your not paying for the expensive reflector, etc… and the shipping box would be much smaller and lighter.

Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.

Supfire L5-S thread with XHP70.2, Texas Avenger FET driver, NarsilM v1.0 ramping firmware, 2 x 26350 cells, lighted side switch. My mini L6! 

Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.

10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices - Headlight List with prices, specs and features

Jaxmnve M1 Stainless 10180 Keychain light Review  - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results

DENGOH
DENGOH's picture
Offline
Last seen: 34 min 31 sec ago
Joined: 10/06/2012 - 05:26
Posts: 2038

Ya, great idea by Jason. If lower head is one of the option it would be great. User can just switch between XHP35 and XHP70.2, save the time of desoldering and soldering.

cool i'll see you when you get there

Henk4U2
Henk4U2's picture
Offline
Last seen: 8 hours 10 min ago
Joined: 02/13/2014 - 17:52
Posts: 2298
Location: The heart of the Netherlands (GMT+1)
JasonWW wrote:
I was thinking of just the lower head, the light engine. Then your not paying for the expensive reflector, etc… and the shipping box would be much smaller and lighter.

+1 Thumbs Up

I always think long and hard before I say something really stupid.

JasonWW
JasonWW's picture
Offline
Last seen: 42 min ago
Joined: 10/22/2016 - 11:41
Posts: 9029
Location: Houston Texas

TA, here are a couple of reflector pictures that you can use in the Google form.


.

Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.

Supfire L5-S thread with XHP70.2, Texas Avenger FET driver, NarsilM v1.0 ramping firmware, 2 x 26350 cells, lighted side switch. My mini L6! 

Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.

10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices - Headlight List with prices, specs and features

Jaxmnve M1 Stainless 10180 Keychain light Review  - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 3 hours 39 min ago
Joined: 03/01/2018 - 04:39
Posts: 813
Location: Germany

I’m in for:
1x BLF GT70 Giggle Monster
with NW emitter, 2 spare carriers, one spare lens and maybe a set of 30QS and a spare reflector
Thank you for this great opportunity!

Wieselflinkpro
Offline
Last seen: 1 hour 51 min ago
Joined: 05/21/2015 - 04:34
Posts: 750
Location: Germany - TLF

Interested in Flashlight or Kit.
Separate Driver would be Interesting too.
4000K is the best for me.

borealis
Offline
Last seen: 1 day 13 hours ago
Joined: 01/24/2017 - 12:17
Posts: 27

Interested in the conversion kit.

joechina
Offline
Last seen: 7 hours 56 min ago
Joined: 03/05/2016 - 08:23
Posts: 1202
Location: Germany
klrman wrote:

btw, are  you joking about being a NASA research contractor?  I never know who’s pulling my leg around here 

You can search the old thread for NASA and you find a few interesting posts.

The one with the measurements is this one
http://budgetlightforum.com/comment/1292046#comment-1292046

Nicolicous
Nicolicous's picture
Offline
Last seen: 6 hours 26 min ago
Joined: 04/16/2016 - 08:28
Posts: 1262
Location: Australia

interested in neutral tint 70.2 kit Big Smile

leaftye
Offline
Last seen: 7 hours 4 min ago
Joined: 07/25/2012 - 17:43
Posts: 4314
Location: San Diego, CA

Don’t want a GT70, but want one battery carrier and lens.

The low mode should be lower.

Reviews: Efan IMR18350 700mAh 10.5A, <a href="http://

LichtAn
Offline
Last seen: 1 month 2 days ago
Joined: 03/08/2018 - 02:37
Posts: 322
Location: Germany

Interested in NW complete flashlight. But only if it delivers the promised lumen. This thing needs to be insane! Crazy

kaybi
Offline
Last seen: 6 days 2 hours ago
Joined: 10/26/2016 - 23:53
Posts: 160
Location: Canary islands

Ok, just a few questions:

The throw claimed is with the de-domed LED, but the led will come dome-on, as I understand it. What would be the throw of the GT70 stock, as it comes from the factory?

The driver used would be fet+1+15, instead of the original buck driver. Is that correct?

Thanks.

FWIW, I think the claimed throw, candela, and lumens should be given as it comes from the factory, not user-modded. Making a note of the expected throw after dedoming is great, but is not how the light comes stock.

thijsco19
Offline
Last seen: 36 min ago
Joined: 12/14/2012 - 16:18
Posts: 1265
Location: Nearby Rotterdam, the Netherlands

JasonWW wrote:
RobertB wrote:
Lumintop should make just a complete head available so we can use our existing carriers and tubes. That would help keep the cost down a bit.

I was thinking of just the lower head, the light engine. Then your not paying for the expensive reflector, etc… and the shipping box would be much smaller and lighter.

This.
It would be perfect of they can offer the light engine with a xhp70.2.

Actually, the reason the head consist of 2 part is partly due to upgradeability. Not only for modding purposes.
Creating a easy and, hopefully much economically, way to upgrade the light with newer or different LEDs.

LichtAn
Offline
Last seen: 1 month 2 days ago
Joined: 03/08/2018 - 02:37
Posts: 322
Location: Germany

kaybi wrote:
Ok, just a few questions:

The throw claimed is with the de-domed LED, but the led will come dome-on, as I understand it. What would be the throw of the GT70 stock, as it comes from the factory?

The driver used would be fet+1+15, instead of the original buck driver. Is that correct?

Thanks.

FWIW, I think the claimed throw, candela, and lumens should be given as it comes from the factory, not user-modded. Making a note of the expected throw after dedoming is great, but is not how the light comes stock.

Would be cool if they would make a dedome option from factory. I mean Acebeam also does it on the K65.

MRsDNF
MRsDNF's picture
Offline
Last seen: 2 hours 48 min ago
Joined: 12/22/2011 - 21:18
Posts: 12609
Location: A light beam away from the missus in the land of Aus.

2 x battery carriers and lenses.

Nice work guys. Thumbs Up

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

ZozzV6
ZozzV6's picture
Online
Last seen: 14 min 53 sec ago
Joined: 03/24/2016 - 12:19
Posts: 1938
Location: Near to my soldering iron.

Filled the form for a neutral mod kit.
Or the lower head light engine if turning out to be that way.

lawallac
lawallac's picture
Offline
Last seen: 10 hours 49 min ago
Joined: 01/04/2012 - 15:31
Posts: 351
Location: WI

I have been using the short tubes on my GTs. Those of us with short and long tubes could make use of spare parts if we were able to buy: 1.Complete head 2.Tailcap 3. Battery Carrier

I would imagine quite a few of us have GTs already with both battery configurations and would like to have a lower cost alternative to make 2 complete lights.

JasonWW
JasonWW's picture
Offline
Last seen: 42 min ago
Joined: 10/22/2016 - 11:41
Posts: 9029
Location: Houston Texas

kaybi wrote:
Ok, just a few questions:

The throw claimed is with the de-domed LED, but the led will come dome-on, as I understand it. What would be the throw of the GT70 stock, as it comes from the factory?

The driver used would be fet+1+15, instead of the original buck driver. Is that correct?

Thanks.

FWIW, I think the claimed throw, candela, and lumens should be given as it comes from the factory, not user-modded. Making a note of the expected throw after dedoming is great, but is not how the light comes stock.


Keep in mind that Lumintop has not built this light yet, so there’s not even a prototype to get measurements from (AFAIK). There are only the several modified GT’s that TA has built and measured.

I have asked TA what specs we should post for the dome-on led. When he wakes up, this info will be updated along with a driver amp draw. It currently says 2.5A @ 12v, but that is a carry over from the original GT spec. The new version should be closer to 7A to 9A range. Plus it might vary based on whether one or two carriers are used.

Before he sliced the dome off he was getting around 1100m to 1200m throw iirc. I can’t remember if that was with all springs bypassed or not.

Dont worry, these specs will be updated soon.

Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.

Supfire L5-S thread with XHP70.2, Texas Avenger FET driver, NarsilM v1.0 ramping firmware, 2 x 26350 cells, lighted side switch. My mini L6! 

Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.

10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices - Headlight List with prices, specs and features

Jaxmnve M1 Stainless 10180 Keychain light Review  - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results

Kendo
Offline
Last seen: 1 week 5 days ago
Joined: 11/08/2017 - 06:46
Posts: 22
Location: Australia

Form filled out and submitted.

JasonWW
JasonWW's picture
Offline
Last seen: 42 min ago
Joined: 10/22/2016 - 11:41
Posts: 9029
Location: Houston Texas
LichtAn wrote:
Would be cool if they would make a dedome option from factory. I mean Acebeam also does it on the K65.
Here is what TA said about it on another thread.
Texas_Ace wrote:
JasonWW wrote:
If they do a driver and emitter, then it really would be an easy swap. Now I am getting interested. I wonder if they can slice the dome too.

I am not sure I would trust them to slice the dome. It is not something easily done on a production line.

It is a simple mod for people to do themselves, though.

Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.

Supfire L5-S thread with XHP70.2, Texas Avenger FET driver, NarsilM v1.0 ramping firmware, 2 x 26350 cells, lighted side switch. My mini L6! 

Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.

10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices - Headlight List with prices, specs and features

Jaxmnve M1 Stainless 10180 Keychain light Review  - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results

quijibo
Offline
Last seen: 3 months 6 days ago
Joined: 12/03/2017 - 16:30
Posts: 3

I’d like to go in for two:

one neutral white
one cool white (could not indicate separate color temp on form)
Also 4x extra carriers
No lenses, conversion kits, or reflectors.

Thanks!

JasonWW
JasonWW's picture
Offline
Last seen: 42 min ago
Joined: 10/22/2016 - 11:41
Posts: 9029
Location: Houston Texas

lawallac wrote:
I have been using the short tubes on my GTs. Those of us with short and long tubes could make use of spare parts if we were able to buy: 1.Complete head 2.Tailcap 3. Battery Carrier

I would imagine quite a few of us have GTs already with both battery configurations and would like to have a lower cost alternative to make 2 complete lights.


A complete head could very well cost 90% of the total lights price. So would you really save any money?

I don’t know the exact number but the cost of the head is by far the most expensive part.

Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.

Supfire L5-S thread with XHP70.2, Texas Avenger FET driver, NarsilM v1.0 ramping firmware, 2 x 26350 cells, lighted side switch. My mini L6! 

Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.

10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices - Headlight List with prices, specs and features

Jaxmnve M1 Stainless 10180 Keychain light Review  - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results

Satisfaction
Satisfaction's picture
Offline
Last seen: 3 days 8 hours ago
Joined: 01/13/2018 - 07:50
Posts: 112
Location: Vermont

I am in for 1
NW
Submitted

avani733
Offline
Last seen: 2 weeks 1 day ago
Joined: 03/16/2018 - 10:21
Posts: 51
Location: 34.656902, -92.406612

1 x BLF GT70, CW

BobTB
Offline
Last seen: 1 day 7 hours ago
Joined: 09/14/2017 - 00:52
Posts: 40
Location: Australia

Filled out the form for 1 conversion kit, thanks TA.

Pages