Nice work maukka, wondering though if your camera allows for Kelvin temperature set-up? The K60 could be shot in 5000 and the L6 in 6500, then the two images should reflect the proper tint? I don’t mess with that much myself, but I can give it a try and see what results can be found from my Canon’s. Pretty sure all of mine allow the Kelvin set-up.
I view video and photographs of all flashlight beam shots with a grain of salt.
I do appreciate the care taken in taking and producing these visual images, but if the end viewer does not have their screen calibrated it is not possible to say everyone is looking at the original graphic representation.
@ the parties disrespecting each other in this thread,
I respect all BLF members and their opinions but please stop. If you have a beef with each other please either get over it or take it elsewhere. There’s an off-topic section if you have things to discuss and there is always PM. I’ve seen several suggestions that it end from the involved parties but not without the added challenge. Telling someone “We should really drop this, but just so you know, I’m right and you are wrong” does not end an argument…ever. Conceding so long as you get the last word in will just keep it rolling.
We all have plenty to say, myself included, but this is not a place for personal quarrels. Here we discuss flashlights and sure we spin out regularly and go off topic but an argument where people are insulting each other has no place here. I absolutely will not allow one of my threads to turn in to a drama scene as others have. I will simply have SB close the thread long before that happens. We’re not there yet but it’s heading down a dark path and I do not want any part of that. With all due respect I ask that we get back to civil discussion.
I measured the cct and tint on different parts of the beam. The central hotspot on the Convoy L6 is actually pretty close to neutral tint (black body radiator), but its cct range and tint shift is more pronounced than with the 90 CRI XHP70. Hotspot was at 6000-6100 K on the L6 and 5100-5200 K on the K60t.
Convoy L6
Acebeam K60t
For comparison: here’s an MT-G2 light (Nitecore EC4SW) which has a more consistent beam tint.
What charger do you guys recommend to charge the keeppower cells? I’d prefer to buy a nice charger that can charge many different types of Lithium Ion cells, as I don’t currently have one. I know Nitecore makes some really nice models, which one do you guys consider the best?
Thanks for the quick reply man. The first one is definitely too expensive. The second one listed is more in my price range. Is that charger better than the best ones nitecore makes? Cause I kinda prefer something from a company I’m familiar with.
I’ve been using Xtar chargers exclusively since I really got into flashlights. I would definitely recommend them over Nitecore. The charging methods are better. Both HKJ and Richard from Mountain Electronics have personally recommended Xtar to me and I’ve been very happy. I know there are higher end chargers that may be better when you’re getting into hobby level chargers but you can get a nice Xtar for under $30. Just my two bits.
I don’t know 1/2 of what the previous posters know, but so far my Opus BT-C3100 appears to work nicely. I believe it will fit 4 26650 in the 4 bays, but only the outside 2 will charge at 2 amps but won’t do that when 3 or more bays are in use. I think it cost me under $50. It also does a bit more than just charging, does everything I need it to do and doesn’t require a lot of expertise. There are reviews of it here on BLF. If you look for one I think the latest software for it is V2.2.
I did have problems with one of the electrodes not making contact with one of the KeepPower 5200s. But a magnet quickly fixed that. BTW, it was shrink tubing on the battery that wasn’t fully shrunk (I assume) and holding the contact away from the battery. I might try to bend the electrode, heat the tubing with some heat, or just continue to use a magnet. I haven’t decided yet but I think doing nothing means that I’ll continue to use a magnet . I think that no matter which charger the battery went into the battery wrapper would have caused the problem.