ENDED

freeme · February 24, 2016, 4:35pm

ENDED

freeme · May 7, 2019, 4:22pm

ENDED

Charga · February 24, 2016, 4:39pm

Put me in for one piece!!

Thanks!

BobbyMK · February 24, 2016, 4:47pm

Can i get info on seller and price, please?

onetrickpony · February 24, 2016, 4:50pm

Put me down for 2 please

freeme · February 24, 2016, 4:53pm

Will be announced later.

L4M4 · February 24, 2016, 4:54pm

I have no idea, what these cells might cost - is it less than 10$ per cell?
Otherwise you can give my place away, the Samsung 30Q are High-Drain enough for me and I’m not willing to pay 10$+ for only 50% more capacity.

mattlward · February 24, 2016, 4:57pm

I am interested in 1, maybe 2 depending on price.

martook · February 24, 2016, 5:00pm

I’m already on the list, and I might want 4 of them (not 2), but that depends on the price…

Anyone have links to tests for the cell? I’ve seen this one from the vapers pov:

https://www.e-cigarette-forum.com/forum/threads/26650-battery-bench-test-results-and-new-ratings-table.725452/

freeme · February 24, 2016, 5:09pm

Price is not released yet but $9 +/- $1 is my guess right now. Let me see if they are to able take some ampere measurement to compare.

thijsco19 · February 24, 2016, 5:19pm

I have one question, does the flat top stick out? And if it does, how much?

1dash1 · February 24, 2016, 5:59pm

Reference: ENEDED - #782 by 1dash1

Any answers yet to previously posted questions?

1dash1:

jigsaw:

The Basen cells are flat tops. Is the S70 able to use flat tops or does it need button tops in order to make a series connection?

jigsaw:

I will buy 4 Basen cells. Maybe more later.

Are they flat tops? Will they for sure work in the S70?

thijsco19:

Looking at the picture of the basen 26650, it looks like the flat top sticks far enough out tot make contact with the orther cell when using it in series.

Any confirmation yet on whether the flattops make contact when in series?

freeme:

You will probably need a raise contact in between both cells.

How about magnet (15mm x 1mm)? I will try to ask to include FOC for each pair battery sold.

15mm x 1mm is much too flat! The neodymium magnets are quite brittle. I’d recommend a size somewhere between 6mm x 1.5mm and 8mm x 2mm. These “[link]”:ALL SOLD: Magnets (6mm x 1.5mm) to convert flat-top batteries into button-tops worked fine for me. Any confirmation on whether magnets will be included with each purchase?

keengeorge · February 24, 2016, 6:31pm

G'Day Freeme,

Please put me down for 2.

Thank you Very Much,

George

RobertB · February 24, 2016, 8:08pm

I would hope they are less than 9 bucks. Normal price at a few places are under 8

Mitko · February 24, 2016, 8:43pm

The one thing that i am interested in is how this cell will behave with a FED dd driver…hoping to be at least as good as Efest Purple 4200

lionheart_2281 · February 24, 2016, 8:46pm

Put me down for 2 if flat top work with the CPFItalia Cometa

tarver · February 24, 2016, 9:27pm

In for 2 or 4 depending on price

tristanxoxo · February 24, 2016, 9:39pm

I’m in for 2. Thanks!

freeme · February 25, 2016, 12:14am

Contact does protrude a little in product pic. Will ask vendor if it is compatible for them to use in series.

That under 8 price is w/o shipping.

Mooch’s test review.

Peetz · February 25, 2016, 12:21am

2, Dependent on pricing…