☞ Freeme Group Buy: TIP_SS/ MF-01/ SuperbIV/ C22CC/ UT03/ SRT-NINE/ ConceptOne/ ET-01/ Tiny26650III/...

1673 posts / 0 new
Last post
pilotdog68
pilotdog68's picture
Offline
Last seen: 3 days 1 hour ago
Joined: 05/30/2013 - 23:31
Posts: 6352
Location: Held against my will in IOWA, USA

Cool! I want to see you open them up. Please?

Mainly I want to know:

  1. Is it glued up tight or easy to get into?
  2. Are the driver and charging circuits distinct from each other?

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

freeme
freeme's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 11/14/2013 - 22:00
Posts: 5101
Location: freedailydeals.org

Bezel is not glued for B. I managed to remove it with the lens. Reflector did not came off as it was held down by black o-ring. LED should be accessible but I stopped at that point because I did not want it to be scratched by mistake or contact with dust. 

pilotdog68 wrote:
Cool! I want to see you open them up. Please? Mainly I want to know: # Is it glued up tight or easy to get into?

 

It could be different... cos I got different readings between A & B (to be confirmed later).

pilotdog68 wrote:
# Are the driver and charging circuits distinct from each other?


As for the clip, it fits perfectly with SF and even Convoy S2+ without modifications(kind of over-sized).

smirdex
Offline
Last seen: 1 month 1 week ago
Joined: 09/30/2015 - 19:21
Posts: 10

Interested in the MH27

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 days 1 hour ago
Joined: 05/30/2013 - 23:31
Posts: 6352
Location: Held against my will in IOWA, USA

Thanks Freeme!

I already ordered a clip because I was hoping it was smaller than the normal convoy clip, but it still looks like a very nice clip.

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

centaurus3200
Offline
Last seen: 2 months 3 days ago
Joined: 11/10/2014 - 18:02
Posts: 229

I got my two ec-r16s yesterday. Looks like the plastic disc for reverse polarity protection means you need button tops. Flat tops won’t work. Kinda a bummer, because I wanted to use the 18350s I already had.

One light seems to work okay with my red efest 18350 flat top. The disc is a little loose on the other, so no dice on that one.

I just ordered yet another 18350. a purple efest button top. I figure I can also use it with my blf a6 shorty tube.

The light that begrudgingly works with the flat top is nice. I gave it to my wife. She really digs it. It’s stupid bright for the size and price. The tint isn’t too blue, and it charged the battery to exactly 4.2v. I used my android phone charger. Lol!

Let’s hope the other one works with the button tip on order.

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 days 1 hour ago
Joined: 05/30/2013 - 23:31
Posts: 6352
Location: Held against my will in IOWA, USA

Consider my interest expressed in the BOSS

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 15 hours 26 min ago
Joined: 12/28/2013 - 08:45
Posts: 1295
Location: Perth

Freeme, thanks for adding my name to the list. Wink

In case I forget, I may need a poke when it comes time to pony up. Beer

jimmy23
Offline
Last seen: 5 hours 22 min ago
Joined: 11/22/2015 - 21:55
Posts: 16
Location: Gun Barrel City

Can I get the info on A,B,C and D please?

unknown00101
Offline
Last seen: 7 hours 45 min ago
Joined: 08/16/2013 - 11:53
Posts: 4267
Location: USA

Definitely interested in the BOSS1. Will need to see a sample sent to an appropriate party to verify quality though.

Kozy
Kozy's picture
Offline
Last seen: 4 hours 20 min ago
Joined: 10/18/2014 - 14:29
Posts: 517
Location: Hungary

I’m interested BOSS1.It would be possible with OP reflector?

slow2go
Offline
Last seen: 6 hours 58 min ago
Joined: 12/24/2012 - 11:26
Posts: 252
Location: So.Calif

I’m interested BOSS1

Cula
Cula's picture
Offline
Last seen: 3 days 17 hours ago
Joined: 11/14/2014 - 02:04
Posts: 318
Location: Croatia

I’m interested BOSS1.

zelee
zelee's picture
Offline
Last seen: 2 hours 1 min ago
Joined: 06/04/2013 - 06:53
Posts: 1860
Location: S.E.A

Interested with BOSS1 Smile

Don’t mistake my kindness for weakness.
I am kind to everyone, but when someone is unkind to me, weak is not what you are going to remember about me.

will34
will34's picture
Offline
Last seen: 1 week 10 min ago
Joined: 12/18/2012 - 00:12
Posts: 3193

Interested in boss1!

dodo
Offline
Last seen: 1 day 16 hours ago
Joined: 03/26/2014 - 13:59
Posts: 240
Location: Italy

Ordered one NITEYE MS – R25!

Thanks

freeme
freeme's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 11/14/2013 - 22:00
Posts: 5101
Location: freedailydeals.org

Thanks for your support!

@archimedes @Patrickbateman @ID4 @will34 @Alux @coolperl @rezzlight @Maiden666 @Scooter000 @khas @mikeyx @Trevi_lux @Skytrooper @shan6oob @Ewen @Mikk0 @euphxenos @Aardvark @slow2go @fourhumors @centaurus3200 @muellihenry @dodo @TomNMich and @RestofGBSupporters 

Abqjohnny
Offline
Last seen: 3 hours 19 min ago
Joined: 08/29/2013 - 23:06
Posts: 307
Location: Fruitland, USA

Interested in boss. Need factory mods though.

Jubeldum
Jubeldum's picture
Offline
Last seen: 1 year 8 months ago
Joined: 11/02/2014 - 09:20
Posts: 2057
Location: Michigan
unknown00101 wrote:
Definitely interested in the BOSS1. Will need to see a sample sent to an appropriate party to verify quality though.

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 days 1 hour ago
Joined: 05/30/2013 - 23:31
Posts: 6352
Location: Held against my will in IOWA, USA

Abqjohnny wrote:
Interested in boss. Need factory mods though.

Factory mods?

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

Kozy
Kozy's picture
Offline
Last seen: 4 hours 20 min ago
Joined: 10/18/2014 - 14:29
Posts: 517
Location: Hungary

pilotdog68 wrote:
Abqjohnny wrote:
Interested in boss. Need factory mods though.

Factory mods?

I am thinking, for example OP Reflector
(and you can change the led: XHP70)
it would be possible?
freeme
freeme's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 11/14/2013 - 22:00
Posts: 5101
Location: freedailydeals.org

http://budgetlightforum.com/node/43132?page=1#comment-853860

Jubeldum wrote:
unknown00101 wrote:
Definitely interested in the BOSS1. Will need to see a sample sent to an appropriate party to verify quality though.
!http://i.imgur.com/9mEVnce.jpg![/quote]
pilotdog68
pilotdog68's picture
Offline
Last seen: 3 days 1 hour ago
Joined: 05/30/2013 - 23:31
Posts: 6352
Location: Held against my will in IOWA, USA

Kozy wrote:
pilotdog68 wrote:
Abqjohnny wrote:
Interested in boss. Need factory mods though.

Factory mods?

I am thinking, for example OP Reflector
(and you can change the led: XHP70)
it would be possible?

For the record, I personally hope they don’t change a thing (assuming there is a solid emitter shelf). The draw for me is a huge reflector to turn 1600lumens from an XM-L2 into total laser beam. It would be cool if they can do both SMO and OP in the future, but I fear that would raise the price and take a long time to work out. I want this thing as quickly and cheaply as possible.

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

roberta
Offline
Last seen: 1 month 6 days ago
Joined: 09/01/2013 - 20:38
Posts: 92
Location: Downunder

I’m interested in the Palight BOSS1

Thank you,
Roberta

Greetings from The Land Downunder

pommie
Offline
Last seen: 2 hours 20 min ago
Joined: 08/28/2013 - 03:56
Posts: 870
Location: Corio, Victoria, Australia

Interested in the Boss1,
provided there is a solid emitter shelf or decent pill, after all this thing is just begging for Max POWWWWER.
An option for OP reflector would be nice but not a show stopper.

Cheers David

Nothing to see here folks, move along...BLF GT proto

monanza
Offline
Last seen: 1 year 2 months ago
Joined: 08/11/2015 - 19:46
Posts: 163
Location: California, United States

I’ll take a big Boss1!

Abqjohnny
Offline
Last seen: 3 hours 19 min ago
Joined: 08/29/2013 - 23:06
Posts: 307
Location: Fruitland, USA

Sorry. What I meant was good to go from the factory unlike the courui d01 that needed some tweaking.

freeme
freeme's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 11/14/2013 - 22:00
Posts: 5101
Location: freedailydeals.org

PALIGHT BOSS1

$48

if we have over 30 confirmed buyers!!! 

D10ten
D10ten's picture
Offline
Last seen: 5 hours 1 min ago
Joined: 07/13/2014 - 18:13
Posts: 302

Hi Freeme, I’m interested in MH27. Please sign me up please.

freeme
freeme's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 11/14/2013 - 22:00
Posts: 5101
Location: freedailydeals.org

Updated!

D10ten wrote:
Hi Freeme, I'm interested in MH27. Please sign me up please.
M4D M4X
M4D M4X's picture
Offline
Last seen: 2 hours 15 min ago
Joined: 03/19/2014 - 05:17
Posts: 5415
Location: Austria (GMT + 1)

can the BOSSes 1680 Lumen from a single XM-L2 be trusted ?

find all available items in this list

i launched my new blog - all deals for members without MAP B$ Wink

find a short description about my idea here

 

if you want to buy a flashlight or battery for a better price: just send a mail - i will try to save you money!

Pages