[Updated 2019/3/19]S11 flashlight and SST40 driver are on sale now

570 posts / 0 new
Last post

Pages

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
[Updated 2019/3/19]S11 flashlight and SST40 driver are on sale now

2019/3/19
S11 flashlight and SST40 driver are on sale now

S11 with XHP50.2

sst40 driver

2019/3/16
unfortunately,i didnt get SST40 5000K
ramping driver is ready
here is the link of flashlight
black C8+ with SST40

2019/3/8
just for fun,i dont know if BLFers need this Big Smile



2019/3/2
sst20 2700k 95CRI on sale

2019/2/19
sst20 6500k / 5000k ,more Tc option for S2+ gray

Notice Ra(6500K/5000K)=70

2019/2/17
convoy S11 host

2019/2/13
Convoy S11 with XHP50.2 ready for sale
Driver :0.1%moonlight-3%low-30%mid-100%high double click – strobe, max output 3A,

max 14000CD

2019/1/16
XML2 T6-5A1 XML2 T6-5D4 and some other LED

2019/1/10
S2+ gray with luminus SST20 Ra>95

2018/12/24

Black C8+ with Nichia 219C Ra>90

Gray S2+ with Nichia 219C Ra>90

BLF discount 15%off
Pls leave me message and notify me to change the amount after you place an order.

Edited by: Simon Mao on 03/19/2019 - 03:54
klrman
klrman's picture
Offline
Last seen: 8 hours 6 min ago
Joined: 11/07/2016 - 22:44
Posts: 2129
Location: Canada

Hey Simon, I think there is something wrong with your shipping info.  All lights say $57.54 to ship to Canada with no other option available? 

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
klrman wrote:

Hey Simon, I think there is something wrong with your shipping info.  All lights say $57.54 to ship to Canada with no other option available? 

something wrong with the aliexpress system,
although strike stopped for a long time, but the system still dont supply air mail shipping option.
i have a paypal account, you can leave me the screen capture of your cart on aliexpress

alberto7
Offline
Last seen: 1 day 11 hours ago
Joined: 08/17/2014 - 06:04
Posts: 181

Hi Simon what gasket you use for C8+ and S2+ (nichia version)?

klrman
klrman's picture
Offline
Last seen: 8 hours 6 min ago
Joined: 11/07/2016 - 22:44
Posts: 2129
Location: Canada

Simon Mao wrote:
klrman wrote:

Hey Simon, I think there is something wrong with your shipping info.  All lights say $57.54 to ship to Canada with no other option available? 

something wrong with the aliexpress system, although strike stopped for a long time, but the system still dont supply air mail shipping option. i have a paypal account, you can leave me the screen capture of your cart on aliexpress

 

Ok thanks.

RobertB
RobertB's picture
Offline
Last seen: 2 hours 56 min ago
Joined: 12/18/2015 - 17:49
Posts: 3034
Location: USA, Michigan

Hi Simon, nice to see you here. Can a 8*7135 driver be ordered for the C8+ ?

moridin
Offline
Last seen: 2 weeks 5 days ago
Joined: 07/16/2011 - 15:36
Posts: 39
Location: Germany

Hi Simon,

could you please specify the flux bin of the leds?

Jack Kellar
Jack Kellar's picture
Offline
Last seen: 1 hour 49 min ago
Joined: 03/09/2014 - 14:21
Posts: 1478
Location: Throwing bolts at anomalies

Guys, it’s much simpler to message him on AliExpress.

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
alberto7 wrote:
Hi Simon what gasket you use for C8+ and S2+ (nichia version)?

adam7027
Offline
Last seen: 10 hours 15 min ago
Joined: 09/26/2017 - 13:54
Posts: 333
Location: EU (Hu)

A good and very welcomed step forward, Simon Smile

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
RobertB wrote:
Hi Simon, nice to see you here. Can a 8*7135 driver be ordered for the C8+ ?

i dont recommend 7135*8 ,friend

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan

moridin wrote:
Hi Simon,

could you please specify the flux bin of the leds?

ICH0BA-sm575D240L2R9050
ICH0BB-sm405D240L2R9050

ggf31416
Offline
Last seen: 2 hours 7 min ago
Joined: 02/25/2016 - 17:38
Posts: 203
Location: Uruguay

People use a FET driver for the 219C all the time. The 219C current rating is very conservative. It’s unlikely that 2.8A will cause any issue as long as the MCPCB has DTP.

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
ggf31416 wrote:
People use a FET driver for the 219C all the time. The 219C current rating is very conservative. It’s unlikely that 2.8A will cause any issue as long as the MCPCB has DTP.

uh,i just dont recommend Smile

Yokiamy
Yokiamy's picture
Online
Last seen: 1 min 6 sec ago
Joined: 10/18/2016 - 15:47
Posts: 1322
Location: Netherlands

I have used a 219c in an S2+ for a few years now at 2,8A.
It gives a very nice beam, but after a couple of minutes, it gets hot though.

Any chance for a stainless steel L6 bezel Simon?

And a lighted sideswitch as a spare part?

Edited by: sb56637

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan

Yokiamy wrote:
I have used a 219c in an S2+ for a few years now at 2,8A.
It gives a very nice beam, but after a couple of minutes, it gets hot though.

Any chance for a stainless steel L6 bezel Simon?

And a lighted sideswitch as a spare part?

No problem with production of the bezel, i just think few people demands it.

i had driver with lighted side switch before,

alberto7
Offline
Last seen: 1 day 11 hours ago
Joined: 08/17/2014 - 06:04
Posts: 181

I have those gaskets. Thanks Smile

Ryzbor
Ryzbor's picture
Online
Last seen: 11 min 41 sec ago
Joined: 01/21/2018 - 10:52
Posts: 85
Location: Poland

Great to see you on BLF Simon!

Nice you started offering high-cri convoys. However most producers seem to implement the SST-20 or LH351D high-cri leds instead of the somewhat oldish 219C.
Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.

Please consider using the well regarded and desired XPL HI 5D or 5A with a nice tint instead of the ugly and yellow XPL HI U6-4C.
Emisar sells the 5D with great success.

Nichia E21A fanboy

Yokiamy
Yokiamy's picture
Online
Last seen: 1 min 6 sec ago
Joined: 10/18/2016 - 15:47
Posts: 1322
Location: Netherlands

Ryzbor wrote:
Great to see you on BLF Simon!

Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.

The SMO is quite new, all my S2+ lights came with the OP standard (except the clear anodized XPL hi version)

Edited by: sb56637

zeremefico
zeremefico's picture
Offline
Last seen: 11 hours 32 min ago
Joined: 03/27/2012 - 02:44
Posts: 1299
Location: Greece

Please Simon build a 21700 C8 with sst-40

₪₪₪₪ ΟΥΔΕΝ ΚΡΥΠΤΟΝ ΥΠΟ ΤΟΝ ΗΛΙΟ ₪₪₪₪

My YouTube channel

Flashlights & edc gear

K40M F16

Yokiamy
Yokiamy's picture
Online
Last seen: 1 min 6 sec ago
Joined: 10/18/2016 - 15:47
Posts: 1322
Location: Netherlands

Maybe we should open a new thread with requests, to see what people like.
On this way Simon can see what might be a succesful lights.

We all love convoy, since it it is proven quality an its mod-ability friendlyness, with a bunch of spare parts to change the light to our wishes.

I would like for example a single cell light like a Emisar D4 from convoy, with Narsil UI but with a smooth Stainless steel bezel (like the Jaxman E2L.)

It would be nice to have the option for multi or single emitter with optics or reflector (like Emisar has multiple choices)
Or something like a XHP50 on a single cell from Convoy with a new sleek design.

Regards Pieter

Edited by: sb56637

mortuus
mortuus's picture
Offline
Last seen: 29 min 10 sec ago
Joined: 12/16/2014 - 09:33
Posts: 1535
Location: Sweden

Hey Simon, any plans for making some new lights next year with 21700/26650 format ? thanks.

...where Frugal meets with Flashlight!

adam7027
Offline
Last seen: 10 hours 15 min ago
Joined: 09/26/2017 - 13:54
Posts: 333
Location: EU (Hu)

Ryzbor wrote:
Great to see you on BLF Simon!

Nice you started offering high-cri convoys. However most producers seem to implement the SST-20 or LH351D high-cri leds instead of the somewhat oldish 219C.
Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.

Please consider using the well regarded and desired XPL HI 5D or 5A with a nice tint instead of the ugly and yellow XPL HI U6-4C.
Emisar sells the 5D with great success.

For XP-L HI 5A/5D, I would like to mention this Cree code:
XPLAWT-H0-0000-000HU60E5
This is just one bin lower than the 70/75 CRI options of the same CCT, 5A/5D with this 80 CRI option could be nice.

For XP-L HI 3D/4A, I think, one of these codes would be the best:
XPLAWT-H0-0000-000LV20F4
XPLAWT-H0-0000-000LV20E4
This is a bit better with 75 CRI – the 70 CRI options are of the same performance bin, so this could be a nice option.

With these two options above, 3A/3B and 4C tints could be replaced.

Speaking about new flashlights, I think, a single (or double serial) 21700 flashlight with d = 22mm driver would be nice.

MascaratumB
MascaratumB's picture
Offline
Last seen: 40 min 42 sec ago
Joined: 10/29/2016 - 12:12
Posts: 3298
Location: Portugal

mortuus wrote:
Hey Simon, any plans for making some new lights next year with 21700/26650 format ? thanks.

He launched a video with the design of a C8 with a 21700 battery Wink

https://youtu.be/1QOpNgLDDlc

REVIEWS: AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 & SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B018 /// ACEBEAM: H20 /// BLITZWOLF: BlitzWolf BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 & A5R / E300S / A8 /// KLARUS: XT1C 

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8  TIR Lenses: 1 / 2   Others: Biscotti 3 & 1*7135     Triple TIR & XP-G2

 MY GIVEAWAY (FW3A)

adam7027
Offline
Last seen: 10 hours 15 min ago
Joined: 09/26/2017 - 13:54
Posts: 333
Location: EU (Hu)

MascaratumB wrote:
mortuus wrote:
Hey Simon, any plans for making some new lights next year with 21700/26650 format ? thanks.

He launched a video with the design of a C8 with a 21700 battery Wink

https://youtu.be/1QOpNgLDDlc

Ah, good to see that Smile I could even imagine an optional interchangeable head for it with an L2 sized reflector.

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan

Ryzbor wrote:
Great to see you on BLF Simon!

Nice you started offering high-cri convoys. However most producers seem to implement the SST-20 or LH351D high-cri leds instead of the somewhat oldish 219C.
Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.

Please consider using the well regarded and desired XPL HI 5D or 5A with a nice tint instead of the ugly and yellow XPL HI U6-4C.
Emisar sells the 5D with great success.

Thanks,i will consider to use SST20 or LH351D ,too
S2+ is not a thrower even installing SMO reflector,but the OP reflector can make the light spot even.
5D and 5A is a little redish ,i will try them

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
zeremefico wrote:
Please Simon build a 21700 C8 with sst-40

what about this

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan

Yokiamy wrote:
Maybe we should open a new thread with requests, to see what people like.
On this way Simon can see what might be a succesful lights.

We all love convoy, since it it is proven quality an its mod-ability friendlyness, with a bunch of spare parts to change the light to our wishes.

I would like for example a single cell light like a Emisar D4 from convoy, with Narsil UI but with a smooth Stainless steel bezel (like the Jaxman E2L.)

It would be nice to have the option for multi or single emitter with optics or reflector (like Emisar has multiple choices)
Or something like a XHP50 on a single cell from Convoy with a new sleek design.

Regards Pieter

i’m ready to launch an new model ,single cell ,XHP50.2
it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port,
what battery are you ready to use?

BROODMASTER
Offline
Last seen: 6 days 4 hours ago
Joined: 08/31/2013 - 16:10
Posts: 262

Simon Mao wrote:
zeremefico wrote:
Please Simon build a 21700 C8 with sst-40
what about this !http://farm5.staticflickr.com/4879/31526162057_c09339d5e0_b.jpg![/quote]

 

Yes! with Narsil.

h

BROODMASTER
Offline
Last seen: 6 days 4 hours ago
Joined: 08/31/2013 - 16:10
Posts: 262

Simon Mao wrote:
Yokiamy wrote:
Maybe we should open a new thread with requests, to see what people like. On this way Simon can see what might be a succesful lights. We all love convoy, since it it is proven quality an its mod-ability friendlyness, with a bunch of spare parts to change the light to our wishes. I would like for example a single cell light like a Emisar D4 from convoy, with Narsil UI but with a smooth Stainless steel bezel (like the Jaxman E2L.) It would be nice to have the option for multi or single emitter with optics or reflector (like Emisar has multiple choices) Or something like a XHP50 on a single cell from Convoy with a new sleek design. Regards Pieter
i'm ready to launch an new model ,single cell ,XHP50.2 it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port, what battery are you ready to use? !http://farm5.staticflickr.com/4813/31526273027_b785668bf9_b.jpg![/quote]

 

I would like it w/50.2 or SST 40, 21700 and Narsil

h

Simon Mao
Simon Mao's picture
Offline
Last seen: 2 hours 32 min ago
Joined: 12/06/2018 - 23:44
Posts: 197
Location: China,Dong guan
BROODMASTER wrote:

Simon Mao wrote:
Yokiamy wrote:
Maybe we should open a new thread with requests, to see what people like. On this way Simon can see what might be a succesful lights. We all love convoy, since it it is proven quality an its mod-ability friendlyness, with a bunch of spare parts to change the light to our wishes. I would like for example a single cell light like a Emisar D4 from convoy, with Narsil UI but with a smooth Stainless steel bezel (like the Jaxman E2L.) It would be nice to have the option for multi or single emitter with optics or reflector (like Emisar has multiple choices) Or something like a XHP50 on a single cell from Convoy with a new sleek design. Regards Pieter
i’m ready to launch an new model ,single cell ,XHP50.2 it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port, what battery are you ready to use? !http://farm5.staticflickr.com/4813/31526273027_b785668bf9_b.jpg!

 


I would like it w/50.2 or SST 40, 21700 and Narsil

any link or information about Narsil?
i dont know this firmware

Pages