Low-cost copper pills, spacers, optics, drop-ins. Custom parts.

1769 posts / 0 new
Last post
Skylight
Skylight's picture
Offline
Last seen: 27 min 9 sec ago
Joined: 10/01/2018 - 04:49
Posts: 827
Location: Europe
kiriba-ru wrote:
… 1. If you have recieved a package from Russia, please leave your message in this thread. Including information how long did it take. …

My package from Russia has arrived in 25 days. Mail Cool

My Youtube channel: Alllightson Reviews

My 7th Old lumens contest build: Matainvoy ML18SBuilt video

My reviews: Sofirn SP31 V2.0Nightwatch NI40 StalkerSofirn C8F 21700Brinyte WT01 ApolloSofirn SD05

My Youtube video-reviews: Brinyte WT01 Apollo, Sofirn SD05

Superstocker
Superstocker's picture
Offline
Last seen: 4 hours 50 min ago
Joined: 11/28/2018 - 21:22
Posts: 215
Location: United States, Virginia
kiriba-ru wrote:
Lolaralph wrote:
Can I get a price for maglite heatsinks, thanks
How many do you need?

Kiriba If you do a run I would take three as long as the price was about what they were last time.

I have not gotten any packages from Russia recently. A package from Ukraine just came and took right at one month.

tekwyzrd
tekwyzrd's picture
Offline
Last seen: 9 hours 43 min ago
Joined: 11/14/2015 - 01:15
Posts: 1265
Location: Northeastern Ohio

kiriba-ru wrote:
Lolaralph wrote:
Can I get a price for maglite heatsinks, thanks

How many do you need?
tekwyzrd wrote:
when my 4×18a arrives i’ll be able to provide dimensions but if a custom centering ring for a 32mm noctigon for the 4×18a would be possible… a simple spacer to fit into the head to center the mcpcb i’d add it to my next
Dont have one on hands, but stock pcb cavity looks smaller than 32mm…

Yes, it is smaller. The idea is to fit a piece of copper into the original mcpcb area and install the larger mcpcb over it with a ring surrounding it and screwed down to hold the emitter centered.

Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws. – Douglas Adams

Lolaralph
Offline
Last seen: 2 months 1 week ago
Joined: 03/30/2013 - 00:02
Posts: 16
Location: Indiana,Pennsylvania

kiriba-ru wrote:
Lolaralph wrote:
Can I get a price for maglite heatsinks, thanks

How many do you need?

I’d like 2 if possible

tekwyzrd wrote:
when my 4×18a arrives i’ll be able to provide dimensions but if a custom centering ring for a 32mm noctigon for the 4×18a would be possible… a simple spacer to fit into the head to center the mcpcb i’d add it to my next
Dont have one on hands, but stock pcb cavity looks smaller than 32mm…
Lolaralph
Offline
Last seen: 2 months 1 week ago
Joined: 03/30/2013 - 00:02
Posts: 16
Location: Indiana,Pennsylvania
Superstocker wrote:
kiriba-ru wrote:
Lolaralph wrote:
Can I get a price for maglite heatsinks, thanks
How many do you need?

Kiriba If you do a run I would take three as long as the price was about what they were last time.

I have not gotten any packages from Russia recently. A package from Ukraine just came and took right at one month.

I’d like 2 if possible

dorpmuller
dorpmuller's picture
Offline
Last seen: 3 weeks 4 days ago
Joined: 10/20/2010 - 18:29
Posts: 1038
Location: Central Pa., U.S.A.

I'm counting mine gone. I never did receive it and I gave up. Don't think I'm gonna get it at this point. 

"I am the flashlight king! I can light anything!"

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

Only one parcel from twenty sent to States after 15th March have been delivered.
I don’t believe 19 other have been lost.
Anyway, I agree that 2.5 month are overkill.
I can make refund, resent item tomorrow or resent it after airline industry is back to normal life. By your choice.

MascaratumB
MascaratumB's picture
Offline
Last seen: 27 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 5284
Location: Portugal

Today I contacted my national post office service about the parcel coming from you (that arrived to the country 10 days ago) and another one from Simon (that arrived 20 days ago).
I’ll be looking for their reply and I really hope they can locate both of them soon!
I’ll post again when I receive the parcels Thumbs Up

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 / PT18pro / PT28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3/ 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

dorpmuller
dorpmuller's picture
Offline
Last seen: 3 weeks 4 days ago
Joined: 10/20/2010 - 18:29
Posts: 1038
Location: Central Pa., U.S.A.

kiriba-ru wrote:
Only one parcel from twenty sent to States after 15th March have been delivered. I don't believe 19 other have been lost. Anyway, I agree that 2.5 month are overkill. I can make refund, resent item tomorrow or resent it after airline industry is back to normal life. By your choice.

PM incoming. 

"I am the flashlight king! I can light anything!"

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

I appreciate everyone who is waiting for his parcel for a long time.
There is some probability that international flights will get back to more often schedule after July, 1st.
If your country had many limitations for an incoming post (easy to recognize by an unusual tiny amount of small parcels laying on the shelves in your local post office), please be ready to wait for an extra month or so after the parcel has been imported. This local delay doesn’t really correlate with the country’s size or population.

id30209
id30209's picture
Offline
Last seen: 1 hour 17 min ago
Joined: 05/17/2018 - 12:20
Posts: 1120
Location: Croatia

Package received in Croatia after 34days of traveling.

WTB Titanium 4sevens 2xAA tube

MascaratumB
MascaratumB's picture
Offline
Last seen: 27 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 5284
Location: Portugal

Hey, my package arrived today Party
It was shipped on the 20th April, and arrived on 5th June.
Since the 21st May it was sitting in Lisbon after “national reception” state. [With this I also received my package from Convoy that was sitting there since the 12th May… Facepalm ]

Everything is as it should Wink Thanks kiriba-ru for your work and patience you also had with this Thumbs Up

Modding time now Evil

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 / PT18pro / PT28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3/ 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

Skylight
Skylight's picture
Offline
Last seen: 27 min 9 sec ago
Joined: 10/01/2018 - 04:49
Posts: 827
Location: Europe

Interesting heatsinks you have there, MascaratumB. Would you mind telling me what flashlight they are for?

My Youtube channel: Alllightson Reviews

My 7th Old lumens contest build: Matainvoy ML18SBuilt video

My reviews: Sofirn SP31 V2.0Nightwatch NI40 StalkerSofirn C8F 21700Brinyte WT01 ApolloSofirn SD05

My Youtube video-reviews: Brinyte WT01 Apollo, Sofirn SD05

MascaratumB
MascaratumB's picture
Offline
Last seen: 27 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 5284
Location: Portugal

Skylight wrote:
Interesting heatsinks you have there, MascaratumB. Would you mind telling me what flashlight they are for?

Sure!!
The one in the left is for a Convoy S2/S6.
The other are for some zoomie lights I have, bought in Lidl (reviewed here: http://budgetlightforum.com/node/68442), and a SK68 clone.
They have hollow alu pills and…I wannt transform them in hot rods Evil
http://budgetlightforum.com/comment/1566431#comment-1566431

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 / PT18pro / PT28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3/ 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

mitsuki08
Offline
Last seen: 1 hour 11 min ago
Joined: 03/08/2019 - 05:36
Posts: 233

My copper pill and spacer finally arrived. Shipped February 28, arrived May 19 in the post but just got it today due to the pandemic. Orders do tend to take a while to get here in south east asia so I would consider this just about normal really. If there was no pandemic it would’ve probably just shaved a few days off.

Thanks kiriba-ru!

Skylight
Skylight's picture
Offline
Last seen: 27 min 9 sec ago
Joined: 10/01/2018 - 04:49
Posts: 827
Location: Europe
MascaratumB wrote:
Skylight wrote:
Interesting heatsinks you have there, MascaratumB. Would you mind telling me what flashlight they are for?
Sure!! The one in the left is for a Convoy S2/S6. The other are for some zoomie lights I have, bought in Lidl (reviewed here: http://budgetlightforum.com/node/68442), and a SK68 clone. They have hollow alu pills and…I wannt transform them in hot rods Evil http://budgetlightforum.com/comment/1566431#comment-1566431

Thanks, MascaratumB. Those heatsinks for the hollow alu pills look very neat. Good idea to order them from kiriba-ru. Usually I make my own heatsinks with a copper rod, a hand saw and a file. Of course they never look as nice as your professionally machined ones.

My Youtube channel: Alllightson Reviews

My 7th Old lumens contest build: Matainvoy ML18SBuilt video

My reviews: Sofirn SP31 V2.0Nightwatch NI40 StalkerSofirn C8F 21700Brinyte WT01 ApolloSofirn SD05

My Youtube video-reviews: Brinyte WT01 Apollo, Sofirn SD05

Agro
Agro's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 05/14/2017 - 11:16
Posts: 6172
Location: Ślōnsk

Yeah, recently I’ve spent a lot of time manufacturing a Skywolfeye B16 heatsink and I’m not very happy with the outcome. I’ve been thinking about pinging kiriba-ru about making one…and I may do it after all.

MascaratumB
MascaratumB's picture
Offline
Last seen: 27 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 5284
Location: Portugal

At Skylight and Agro,

After doing the bead for the OL Contest, I realized that my lack of tools would be a serious constraint to make this kind of piece. Also, getting, the right size of copper tubes would be a PITA and much more expensive, because the stores around don’t have many materials and they are not cheap in these kind of things.

So, I decided to call for the help of kiriba-ru and the pieces are great Wink
They have different diameters, to fit different pills as I requested! Of course, some will need adjustments to fit better, but they are top quality! So, thanks again kiriba-ru Thumbs Up

BTW, this is the first use of one of the heatsinks. It is on the Aluminium pill of the second Livarnolux zoomie flashlight I showed above.
It will take 2×14500 batteries, a 15mm driver with Bistro HD OTSM and an XHP50.2 (it will not be the one in the photo as I already damage it Facepalm yes, again! Tired ).

I had to file the copper and the alu a little bit, and then I had to hammer it to press fit!

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 / PT18pro / PT28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3/ 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

NeutralFan
NeutralFan's picture
Offline
Last seen: 7 hours 21 min ago
Joined: 03/20/2014 - 19:22
Posts: 1043
Location: Wisconsin, USA

Nice mod MascaratumB!

I’d rather use my flashlight around the house than turn on the lights.

Agro
Agro's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 05/14/2017 - 11:16
Posts: 6172
Location: Ślōnsk

I soldered a number of copper shims to get the rigt thickness and then dremeled it to the right diameter.
The effect could be fine but I just didn’t do it well. Sad

Skylight
Skylight's picture
Offline
Last seen: 27 min 9 sec ago
Joined: 10/01/2018 - 04:49
Posts: 827
Location: Europe

Well done, MascaratumB. Thumbs Up Neat idea to fit a XHP50 in a small zoomie.

As I often have heard that the XHP50.2 6V is sensitive to direct drive and tends to burn will it work with two 14500? Just asking because it could turn out useful for my own builds.

My Youtube channel: Alllightson Reviews

My 7th Old lumens contest build: Matainvoy ML18SBuilt video

My reviews: Sofirn SP31 V2.0Nightwatch NI40 StalkerSofirn C8F 21700Brinyte WT01 ApolloSofirn SD05

My Youtube video-reviews: Brinyte WT01 Apollo, Sofirn SD05

MascaratumB
MascaratumB's picture
Offline
Last seen: 27 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 5284
Location: Portugal

NeutralFan wrote:
Nice mod MascaratumB!

Thanks NeutralFan Wink
Agro wrote:
I soldered a number of copper shims to get the rigt thickness and then dremeled it to the right diameter. The effect could be fine but I just didn’t do it well. Sad

Hum, that must have been hard work Oops But I guess in the end a solid piece will probably end up working better!

Skylight wrote:
Well done, MascaratumB. Thumbs Up Neat idea to fit a XHP50 in a small zoomie.

As I often have heard that the XHP50.2 6V is sensitive to direct drive and tends to burn will it work with two 14500? Just asking because it could turn out useful for my own builds.


Thanks Skylight Thumbs Up

Not to hijack kiriba’s thread, I’ll say that so far I only succeded with an XHP50.2 on my recently modded BlitzWolf BW-ET1, where I put an XHP50.2 with a 15mm driver with Anduril for 2×14500 cells. I only tested it with non high-drain cells (Sofirn 900mAh), so I can’t tell how good it will behave when I start using higher drain cells.

But I guess the problem with the flaws has been due to bad soldering/reflowing of the emitter and not the relation cells / driver / LED. I will need to get some more leds to complete the mods I want to do with similar configurations, and I need to get high-drain cells to see how they resist to higher currents.

About the XHP50.2 on the zoomie, it would probably be better if it was dedomed, but…It will do the trick ! I hope Big Smile

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 / PT18pro / PT28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3/ 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

I appreciate everyone who is waiting for his parcel for a long time.
Unfortunately, more information I get about this situation, I get less sure that it will end well.
From the beginning of this year, the contract between Russianpost and air cargo company has ended and most international dispatches were supposed to fly in passenger airplanes. It worked well when countries had open borders and each airport received hundreds of planes every single day. Then something went wrong.
Overseas shipments that I’ve made between March 15th and May 15th have not left Russia with an airplane (the way they should went). Now they can:
a) be on the slow boat
b) laying in heap, waiting until the heap is big enough to fulfill next slow boat
c) laying in heap, waiting until airlanes get back to work
More recent shipments should go faster (I hope so), some of them have left Russia on June 6-7 and should be imported soon (I hope so).
I do expect pyramid-type sorting delays on both ends (parcels that are laying close to the bottom will be sorted at last, both when exporting and importing), so as soon as I will get delivery confirmation from more recent shipments (again, I HOPE SO), I will be able to offer the reshipment as a go-to way when it is possible.
I will ask everyone to post a message here if you have recently received a parcel from me. This is necessary for other waiting BLFers.

P.S.
This is local meme. In russian net this sculpture is called “the waiting guy”.
For French speakers: https://www.lemonde.fr/europe/article/2017/03/02/jdoun-mascotte-de-la-pa...
For Dutch speakers: http://archief.mareonline.nl/archive/2017/02/09/eindeloos-wachten-ligt-r...
Beelden-in-Leiden-2016-04

Update:
I’ve got the confirmation from Russian post that orders shipped to States in May and April have fulfilled the slowboat and should be delivered by middle of July. Later shipments should go by air.
Update 2:
I’ve got the confirmation from Russian post that orders shipped to Australia in May and April have fulfilled the slowboat and should be delivered by end of July. Still no air connection with Australia, so later shipments will wait until air is open or next slowboat.

id30209
id30209's picture
Offline
Last seen: 1 hour 17 min ago
Joined: 05/17/2018 - 12:20
Posts: 1120
Location: Croatia

I like it...

 

WTB Titanium 4sevens 2xAA tube

Skylight
Skylight's picture
Offline
Last seen: 27 min 9 sec ago
Joined: 10/01/2018 - 04:49
Posts: 827
Location: Europe

Nice explanation, kiriba-ru, thank you.

This must be the reason why some of my parcels from China take ages while your parcel from Russia didn’t need much more time than usual.

My Youtube channel: Alllightson Reviews

My 7th Old lumens contest build: Matainvoy ML18SBuilt video

My reviews: Sofirn SP31 V2.0Nightwatch NI40 StalkerSofirn C8F 21700Brinyte WT01 ApolloSofirn SD05

My Youtube video-reviews: Brinyte WT01 Apollo, Sofirn SD05

tekwyzrd
tekwyzrd's picture
Offline
Last seen: 9 hours 43 min ago
Joined: 11/14/2015 - 01:15
Posts: 1265
Location: Northeastern Ohio

Package shipped 20 May was delivered 13 June. All things considered I think 24 days isn’t bad for shipping time.

Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws. – Douglas Adams

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

kiriba-ru wrote:
If you have plans to order several P60 shells this year, please let me know.

Bump.
I will make another combo (Cu+Alu) batch next month (not sure they will sell fast but anyway need them in stock to be able to make reshipments) and I’m trying to figure out the right proportion between Cu and Alu.
id30209
id30209's picture
Offline
Last seen: 1 hour 17 min ago
Joined: 05/17/2018 - 12:20
Posts: 1120
Location: Croatia

kiriba-ru wrote:
kiriba-ru wrote:
If you have plans to order several P60 shells this year, please let me know.
Bump. I will make another combo (Cu+Alu) batch next month (not sure they will sell fast but anyway need them in stock to be able to make reshipments) and I'm trying to figure out the right proportion between Cu and Alu.

Great!

WTB Titanium 4sevens 2xAA tube

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

kiriba-ru wrote:
kiriba-ru wrote:
If you have plans to order several P60 shells this year, please let me know.

Bump.
I will make another combo (Cu+Alu) batch next month

Any ideas for source of 20-21mm quad pcbs?
For NA
For Australia
Since new intl-outdoor quads are 23mm, KD quad is made for chinese 2-leg optics, seems that the only option for other part of world is wait until led4power store will be reopened.
kiriba-ru
kiriba-ru's picture
Offline
Last seen: 50 min 1 sec ago
Joined: 01/17/2016 - 02:34
Posts: 2025
Location: Russia

Current information from Russian post (for shipment from June 1st, for older shipments please check #1734):
Australia – barge fills 3 weeks, then up to 2 month delivery time
Canada – air connection is alive
Europe – goes with overland transport, takes 3-4 weeks
Japan – air connection is alive
Mid-East, South America, Africa, Oceania – post services not available.
US – air connection is alive

I have shipped not many parcels during the last weeks, and my own statistics are not big enough to make any conclusions.

Pages