SALE: Low-cost copper pills, spacers, optics, drop-ins.

1849 posts / 0 new
Last post
Rufusbduck
Rufusbduck's picture
Offline
Last seen: 9 months 4 days ago
Joined: 04/04/2012 - 15:34
Posts: 10389
Location: Golden state

1 copper B-158 pill. $14
1 led link 35mm punch optic. $ 3
1 shipping under 100g $ 6

Total $23

If this correct please pm and I’ll send payment and address. Thanks. Any chance you’ll do more A6 pills (as in your avatar)? They may not make sense but they sure look good.

Three Tanna leaves to give him life, nine to give him movement. But what if he eats the whole bag?

Scott

steel_1024
steel_1024's picture
Offline
Last seen: 2 days 19 hours ago
Joined: 10/17/2016 - 14:06
Posts: 488
Location: Taiwan

The parcel has been received today.
Very nice, Thanks

Sorry for my poor english.

staticx57
Offline
Last seen: 12 hours 41 min ago
Joined: 04/11/2016 - 00:43
Posts: 716
Location: New Jersey, United States

Got the two P60 pills today thank you!

LenZ
Offline
Last seen: 2 years 9 months ago
Joined: 01/07/2017 - 11:18
Posts: 30
Location: California

Bought one of his quads off e-bay months ago. It sat for a long time awaiting other parts. When I finally went to assemble it (still in original packaging), found the domes off 3 of the emitters and one of the emitters damaged. Tried to work with him through ebay but he refused to do anything. That’s pretty poor customer service.

Len
California, USA
-Gun control is the ability to hit your target
-Targets are easier to see when well lit

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

Those who have real problems and use other way to communicate, we fix them asap.
Cheaters that cant provide any proofs for three month can go their way.
imagebam.com

giorgoskok
giorgoskok's picture
Offline
Last seen: 1 month 2 days ago
Joined: 11/13/2015 - 10:46
Posts: 2671
Location: Greece

Wtf Facepalm

Erethryn
Erethryn's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/08/2016 - 07:17
Posts: 153

Picked my S2+ triple pill and optics up from the post office yesterday, great packaging, complete with a handy storage box Smile


Screws into my existing S2+ host fine and the LD-3 driver fits nicely, although I may have to shave a little off the retaining ring to get a bit more clearance on the moonlight components (not a problem with the ring, just my choice of driver Silly ).

Just need the green host and triple 219C to arrive now!

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

Quote:
10. Copper pill (driver retaining) triple Convoy S2+/S3/EagleEye X2

Kiriba, you may want to change the S3 inclusion from these threaded spacers. Current S3 have the integrated shelf for the emitter. Or include (Old Version)
Quote:
3. Copper spacer for Carclo triple Convoy S2+/S3/EagleEye X2/BLF A6/Astrolux S1
Will work in the new S3 with integrated shelf but without a glass lens.

Still working on my copper collection from you. May make another order when the M2 Quad are back. Some nice new additions.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

vwpieces wrote:
Quote:
10. Copper pill (driver retaining) triple Convoy S2+/S3/EagleEye X2

Kiriba, you may want to change the S3 inclusion from these threaded spacers. Current S3 have the integrated shelf for the emitter. Or include (Old Version)
Quote:
3. Copper spacer for Carclo triple Convoy S2+/S3/EagleEye X2/BLF A6/Astrolux S1
Will work in the new S3 with integrated shelf but without a glass lens.
Yep, I had this message (Old Version) on ebay, have lost it moving here. Not sure about spacer. Convoys have 2 reflector dimentions and S3 should have similar one to S2+. Need more feedback (some members have bought this spacers in 5-10pcs quantity, Im sure somebody else have mod his S3).
Texas_Ace
Texas_Ace's picture
Offline
Last seen: 18 hours 23 min ago
Joined: 03/24/2016 - 07:44
Posts: 9414
Location: Everything is brighter in Texas

IIRC the S3 reflector is between the S2 and S2+ depth. I don’t have one anymore though so I can’t find out for sure.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

Simon is selling reflectors for S2+/S3 20*12mm.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 18 hours 23 min ago
Joined: 03/24/2016 - 07:44
Posts: 9414
Location: Everything is brighter in Texas

Maybe he changed it when he went to the integrated shelf, the one I used to have was the old version with a pill.

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

measured all my S2+ and my S3 reflector and all measure to 11.6mm

My S3 was bought recently as a Host, it is the integrated shelf Flat Balck new version.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

11.6+1.2(center ring)+1.0(stock pcb)=13.8mm
7.2(spacer)+1.8(triple pcb)+6.0(optics)=15.0mm
Can anybody confirm any issues with Convoy triple builds?

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

I still have 3 of your standard Copper S2+ spacers, all measure 7.15mm, 7.17mm, 7.19mm

Noctigon DTP MCPCB is what is widely used in single and triple build
Here are pics of stacks I mocked for measurement.

Noctigon single XM-L with emitter and reflector spacer, S2+/S3 reflector and Stock Glass.

Noctigon Triple, your Carclo Quad and S2+ spacer

Noctigon Triple, your Carclo Quad and S2+ spacer and stock Glass

The stack without Glass works fine in the S3 Triple. Just the threads on the Stainless bezel to hold it together, only has a couple threads. I can not get it to start with Glass on top. I have no problem here just want to inform with my findings on currently made Hosts.

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

Also the S2+ spacer used in the measuring is the 7.15mm high. It has already been Lapped into the head of the S3 to make full contact and the top has been wet sanded Flat on glass surface. So material has been removed in head, on bottom and top of the copper.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

Thanks for the info.
I can just suppose that hosts with integrated shelf are still rare in combination with triple, that`s why nobody have found it out earlier.
I need to check triple sets from KD height and make decision about required spacer height.

VrestoTaylor
VrestoTaylor's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 01/25/2011 - 17:49
Posts: 1111
Location: Slovakia

i have triple xpl and also nichia sets,if you need height..also on the new copper board..

EDC-Mezzol X8R-L xhp70 nw, Astrolux ST01 xhp50

Headlamp-Thrunite TH30 nw

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

Yes, please measure height (without extra legs length).

VrestoTaylor
VrestoTaylor's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 01/25/2011 - 17:49
Posts: 1111
Location: Slovakia

height of the legs?or the complete sets-legs joined with the board?the sizes are not posted on kaidomain exactly?

EDC-Mezzol X8R-L xhp70 nw, Astrolux ST01 xhp50

Headlamp-Thrunite TH30 nw

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

Welcome,
Wanted to point out a few observations on this one before it gets glued together.
The S2+ is assembled from the rear, total size is not as critical as on the S3. S3 only has so much room and no way to compensate.
I honestly have not tried to assemble it with the single emitter stack. Guess I should try before it all gets glued to triple.

OK, Single stack works but there is a small gap under bezel using the Noctigon and XM-L spacer. I also have the O-ring on top of glass. Thinner MCPCB or no O-ring will seat the bezel flush. Guess if your skill level is higher you could also use a flat pad spacer or omit the reflector spacer all together. Space is tight in there.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 01/17/2016 - 02:34
Posts: 2130
Location: Russia

vresto wrote:
height of the legs?or the complete sets-legs joined with the board?the sizes are not posted on kaidomain exactly?

complete set without extra legs length.
VrestoTaylor
VrestoTaylor's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 01/25/2011 - 17:49
Posts: 1111
Location: Slovakia

8,45 mm said my friend,who measured it right now..

EDC-Mezzol X8R-L xhp70 nw, Astrolux ST01 xhp50

Headlamp-Thrunite TH30 nw

giorgoskok
giorgoskok's picture
Offline
Last seen: 1 month 2 days ago
Joined: 11/13/2015 - 10:46
Posts: 2671
Location: Greece

I don’t think this is right , this height you mentioned should be with the extra legs length .

I measured 7.15mm .

ecotack
ecotack's picture
Offline
Last seen: 3 weeks 4 days ago
Joined: 11/11/2016 - 06:50
Posts: 220
Location: UK, Cumbria

@kiriba-ru. Finally built my triples using the spacers you supplied before Christmas (had to wait for KD to reship the LEDs). Spacers were a perfect fit. Thanks!

LenZ
Offline
Last seen: 2 years 9 months ago
Joined: 01/07/2017 - 11:18
Posts: 30
Location: California

As I said, poor customer service.

Not everyone uses a part the day they get it. Or even the same YEAR. That doesn’t excuse rude, dismissive behavior. I’ve made literally thousands of purchases and your response ranks among the top 5 worst. Thanks for confirming my statements.

Len
California, USA
-Gun control is the ability to hit your target
-Targets are easier to see when well lit

vwpieces
vwpieces's picture
Offline
Last seen: 4 months 1 week ago
Joined: 07/17/2016 - 19:49
Posts: 2181
Location: PA, USA

Think I am up to about 10 builds using Kiriba-Ru parts.

Today I finished the Convoy S3 Triple. Good Stuff and Packaging, fast International shipping.



staticx57
Offline
Last seen: 12 hours 41 min ago
Joined: 04/11/2016 - 00:43
Posts: 716
Location: New Jersey, United States

LenZ wrote:
As I said, poor customer service.

Not everyone uses a part the day they get it. Or even the same YEAR. That doesn’t excuse rude, dismissive behavior. I’ve made literally thousands of purchases and your response ranks among the top 5 worst. Thanks for confirming my statements.

I would think there is some reasonable expectation to inspect the part upon delivery or very soon after.

LenZ
Offline
Last seen: 2 years 9 months ago
Joined: 01/07/2017 - 11:18
Posts: 30
Location: California

Parts were fine on arrival with a quick inspection. Domes fell off into the baggie while just sitting in a drawer with other parts I was gathering. I’ve NEVER seen domes just fall off before and would not even think to check even periodically to see if it happened. Nevertheless, I stand by my statement.

Len
California, USA
-Gun control is the ability to hit your target
-Targets are easier to see when well lit

VaKo
Offline
Last seen: 3 weeks 4 days ago
Joined: 08/15/2015 - 15:28
Posts: 183
Location: United Kingdom

I’ve built 3 triples using these parts and the integrated shelf S3 hosts, all worked perfectly.

Pages